Powerful dry drum milling machine with a steplessly adjustable machine body for near-wall and near-floor working.
2.069,00 €
The ATLAS MAX 82/2 is the most powerful hand milling machine in the ATLAS range: with 1,790 W of power and a high-quality gearbox, it is designed for rugged continuous use removing tile adhesive, coatings, filler compounds, paint and render from mineral substrates. The proven drum-milling principle enables an exactly defined material removal of 1 to 10 mm per pass – significantly more controlled than conventional grinding, and without smearing tough-elastic surfaces. The steplessly adjustable machine body can be rotated up to 150° relative to the milling drum during operation (12 detent positions), enabling near-wall and near-floor working without a tool change. Thanks to precisely targeted extraction directly at the rotating drum, the machine runs with very low dust by design. For renovators, hazardous-material renovators, painters, plasterers and floor renovators looking for a powerful, precise and low-dust milling machine for professional continuous use, the ATLAS MAX 82/2 is the right choice.
1,790 W and a high-quality gearbox for continuous use.
Rotatable up to 150° for working close to walls and floors.
Drum-milling principle with continuously variable depth adjustment.
Precise dust extraction directly at the milling drum.
Dry hand milling machine for removing tile adhesive, coatings, filler compounds, firm and tough-elastic adhesives, paint and render from mineral substrates. Particularly suitable for renovators, hazardous-material renovators, painters, plasterers and floor renovators in professional continuous use. Not suitable for processing metals.
Power: 1,790 W
Voltage: 230 V
Operating mode: dry
Speed: 7,000 rpm
Working width max.: 82 mm
Working depth: 0–10 mm
Tool Ø max.: 98 mm
Tool mount (spindle thread): M14
Weight: 5.6 kg
1 x silicone mains cable 4 m
1 x guard with rotatable, flexible extraction hose
1 x connector for vacuum cleaner
1 x pin wrench
1 x clamping nut with locking screw
1 x 6 mm Allen key
1 x case
ATLAS Milling Drum Diamond Blue
(Varianten)
Diamond milling drum Ø82 mm with soft bond for coatings under 2 mm and mineral floors.
584,00 €
ATLAS Milling Drum Diamond Red
(Varianten)
Diamond milling drum Ø82 mm with medium bond for concrete, old concrete and screed.
584,00 €
ATLAS Milling Drum Diamond Rib Form
Art.Nr.: 150.010.214
Diamond milling drum 82 mm in rib form with medium bond — for precise grooving in concrete and mineral floors at a high rate of progress.
669,00 €
ATLAS Milling Drum Hybrid Grey
(Varianten)
Diamond milling drum Ø82 mm with hard bond for coatings, sealants and adhesive residues.
636,00 €
ATLAS Milling Drum PCD Black
Art.Nr.: 150.010.201
Diamond milling drum Ø82 mm with PCD bond for hard coatings, sealants and industrial floors.
698,00 €
ATLAS Milling Drums
(Varianten)
Diamond milling drums Ø82 mm for dry grinding — matched to ATLAS drum milling machines, for coating removal, floor preparation and grooving.
From: 584,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: removal of tile adhesives, coatings, filler compounds, firm and tough-elastic adhesives, paints and render on mineral substrates. Metals must not be processed. Intended exclusively for dry use — never operate with water supply. Only carry out milling work with a suitable vacuum cleaner with a matching fine-dust filter connected. Only milling drums approved or licensed by GALESKI may be used.
Personal protective equipment must be worn during operation: safety goggles, dust mask and hearing protection. Protective gloves, a safety helmet, non-slip safety shoes and an apron are recommended.
Noise emission: sound pressure level 92 dB(A), sound power level 103 dB(A) – hearing protection required. Vibration: 7 m/s².
Dust containing crystalline silica produced when working stone is hazardous to health. Toxic or asbestos-containing materials (e.g. PCB, asbestos, bitumen/PAH applications) may only be processed by personnel specially trained for this purpose for remediation purposes.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions.
