In a multi-storey or underground car park, the old coating has to come off at damaged spots, edges and junctions – cleanly bounded and at a defined depth. The ATLAS drum milling machine mills 82 mm wide, you set the depth on the machine; the shop lists the PCD milling drum for OS 11 and OS 8.
ATLAS Max 82 · Generation 2 · Dry
2.069,00 €
Columns, wall junctions, ramps, gullies and kerbs are left over when working the main area. This is where hand work follows – with a tool that holds the same depth.
Repairs often concern individual bays or damaged spots. The drum mills a strip with a clear edge; the milling depth is set, not dependent on contact pressure.
Parking levels produce a lot of milled material, underground car parks under a closed ceiling. The removed material is captured at the drum and taken into the vacuum, for large amounts via a pre-separator.
According to the shop, the ATLAS Milling Drum PCD Black is designed with 14 defined PCD cutting edges for particularly hard and abrasive coatings and lists “OS11/OS8 coatings” under “suitable materials”, along with asphalt and mastic asphalt. If the concrete itself is to be milled afterwards: Diamond Red (medium bond) for concrete and old concrete.
Note: Unsure which drum suits your build-up? Galeski advises: galeski.shop/en/contact/
The guard with extraction hose takes the removed material to the vacuum: Dustcleaner 200 (dust class H, HEPA filter) or Dustcleaner 300 (dust class M). According to the shop, the Cyclone 501 upstream separates 98–99 % of the extracted material into its 50 litre drum and protects the vacuum filter.
On the ATLAS Max 82 you set the milling depth continuously and without tools, 0–10 mm per pass; “variable infeed depth” says the Manufaktur video, which shows two milled strips of different depth in a car park coating. The drum rotation throws the milled material straight towards the extraction.
On the ATLAS Max 82 you adjust the machine body up to 150° to the milling drum during work, continuously or in 12 detent positions; on the ATLAS Max 82 BL almost continuously to beyond vertical. In the Manufaktur video: “precise edge work” right into the corner.
All three mill 82 mm wide and 0–10 mm deep with the PCD milling drum. They differ in motor, drive and weight.
 ATLAS Max 82Generation 2 · Dry |  ATLAS Max 82 BLBrushless · Dry |  Air ATLAS MaxCompressed air · Dry | |
|---|---|---|---|
| Working depth | 0–10 mm | 0–10 mm | 0–10 mm |
| Working width max. | 82 mm | 82 mm | 82 mm |
| Power | 1,790 W | 1,400 W | 900 W |
| Speed | 7,000 rpm | 6,400 rpm | 5,400 rpm |
| Weight | 5.6 kg | 4.9 kg | 3.2 kg |
| Best for | The machine from the Manufaktur video: 1,790 W, a constant 7,000 rpm under load, machine body up to 150°. | Brushless, 4.9 kg, high torque for dense, hard and tough-elastic materials. | Compressed air with no electricity at the machine, 3.2 kg, machine body up to 150° – where a compressor is on site. |
| Price | 2.069,00 € plus shipping View in shop | 2.188,00 € plus shipping View in shop | 2.766,00 € plus shipping View in shop |
Best for: The machine from the Manufaktur video: 1,790 W, a constant 7,000 rpm under load, machine body up to 150°.
2.069,00 €
Best for: Brushless, 4.9 kg, high torque for dense, hard and tough-elastic materials.
2.188,00 €
Best for: Compressed air with no electricity at the machine, 3.2 kg, machine body up to 150° – where a compressor is on site.
2.766,00 €
Two milled strips of different depth in a car park coating (OS 11), the ATLAS MAX 82 behind them. Still from the Galeski Manufaktur video on the ATLAS MAX 821.
Drum milling machine, PCD milling drum for OS 11/OS 8, dust class H industrial vacuum and pre-separator for large amounts.
ATLAS Max 82Generation 2 · Dry2.069,00 €
ATLAS Milling Drum PCD BlackDry698,00 €
Dustcleaner 200Dry1.199,00 €
Cyclone 501Wet/Dry769,00 €
Together from4.735,00 €plus shipping
According to the shop, the ATLAS Milling Drum PCD Black: it lists “OS11/OS8 coatings” under “suitable materials”. Galeski advises on questions about the build-up: galeski.shop/en/contact/
0–10 mm per pass on the ATLAS Max 82, ATLAS Max 82 BL, Air ATLAS Pro and Air ATLAS Max, 0–8 mm on the ATLAS Pro 82 BL. On the ATLAS Max 82 continuously adjustable without tools.
On the ATLAS Max 82 and Air ATLAS Max you adjust the machine body up to 150° during work, continuously or in 12 detent positions – close to walls and floors, pulling or pushing with the Air ATLAS Max.
The PCD Black and Hybrid Grey milling drums list asphalt and mastic asphalt under “suitable materials”.
No. The ATLAS drum milling machines and milling drums are intended for dry use only. The dust is captured right at the milling drum with a vacuum cleaner connected.
