Aluminium guide rail with rubber-mounted underside in 100, 150 and 200 cm – for perfectly straight cuts with Turbocut 160, Lioncut 200 and Smart Cutter Plus.
From: 61,00 €
The aluminium rail is the basis of the GALESKI rail system: the Turbocut 160, Lioncut 200 and the Smart Cutter Plus models run perfectly straight on it. The rubber on the underside protects the surface and prevents slipping. Several rails can be joined with the connecting adapter for longer cuts.
Length: 100 cm (short), 150 cm (medium), 200 cm (long)
Material: aluminium
Underside: rubber-mounted
For Turbocut 160 DCS, Lioncut 200 Dry Plus, Lioncut 200 Combi Plus, Smart Cutter 125 Plus BL, Smart Cutter 1500 Vario Plus and Smart Cutter 1700 Vario Plus. Fixed to the workpiece with the suction cups from the basic set. Part of the Aluminium Rail System.
Turbocut 160 DCS
(Varianten)
Dry stone cutter with integrated dust extraction (Dust Control System) – low-dust without an additional vacuum cleaner, with guide plate, up to 40 mm cutting depth.
1.142,00 €
Lioncut 200 Dry Plus
(Varianten)
Professional dry cutter with mountable guide plate and extraction connection – freehand or with the GALESKI rail system, up to 63 mm cutting depth.
1.295,00 €
Lioncut 200 Combi Plus
(Varianten)
Professional wet and dry cutter with mountable guide plate, extraction connection and convertible water supply – up to 63 mm cutting depth.
From: 1.428,00 €
Smart Cutter 125 Plus BL
Art.Nr.: 003.036.602BL
Brushless stone cutter with extraction hood and removable guide plate – freehand, guided, with side stop or on the GALESKI rail system.
598,00 €
Smart Cutter 1500 Vario Plus
Art.Nr.: 003.036.612
Powerful stone cutter with extraction hood and removable guide plate – freehand, guided, with side stop or on the GALESKI rail system.
658,00 €
Smart Cutter 1700 Vario Plus
(Varianten)
The most powerful model in the SMART CUTTER PLUS series: 1,750 W, cutting discs up to Ø 150 mm, 40 mm cutting depth – with extraction hood and removable guide plate.
758,00 €
This accessory is intended for use with compatible Galeski machines and is not a stand-alone power tool. There are no separate operating instructions for this product – the safety and operating instructions of the machine used apply; read and follow them carefully before use.
Check for damage, wear and secure fit before each use. Do not continue to use damaged or worn parts.
Use only with suitable and approved machines; do not exceed the permissible speed or load of the machine used.
Wear personal protective equipment when working: depending on the application, eye protection or safety goggles, hearing protection, a dust mask and protective gloves.
Keep out of the reach of children and do not allow children to use it.
