Guiding and connecting part for the Turbocut 160 (aluminium rail system) and Wetcut 180/3 (GADIA Line).
63,00 €
The connecting adapter links the machine to the rail: the Turbocut 160 to the aluminium rail system, the Wetcut 180/3 to GADIA Line.
Design: guiding and connecting part of the machine to the rail system
For Turbocut 160 DCS on the aluminium rail and for Wetcut 180/3 and Wetcut 180/3 Plus on the GADIA Line slide rail. Part of the Aluminium Rail System and the GADIA Line Rail System.
Turbocut 160 DCS
(Varianten)
Dry stone cutter with integrated dust extraction (Dust Control System) – low-dust without an additional vacuum cleaner, with guide plate, up to 40 mm cutting depth.
1.142,00 €
Wetcut 180/3
(Varianten)
Precise wet stone cutter for natural stone with stepless speed control
From: 1.205,00 €
Wetcut 180/3 Plus
(Varianten)
Wet and dry stone cutter with integrated extraction device for low-dust cutting when connected to a wet vacuum cleaner.
From: 1.517,00 €
This accessory is intended for use with compatible Galeski machines and is not a stand-alone power tool. There are no separate operating instructions for this product – the safety and operating instructions of the machine used apply; read and follow them carefully before use.
Check for damage, wear and secure fit before each use. Do not continue to use damaged or worn parts.
Use only with suitable and approved machines; do not exceed the permissible speed or load of the machine used.
Wear personal protective equipment when working: depending on the application, eye protection or safety goggles, hearing protection, a dust mask and protective gloves.
Keep out of the reach of children and do not allow children to use it.
