Precise wet stone cutter for natural stone with stepless speed control
From: 1.205,00 €
The WETCUT 180/3 is a professional wet stone cutter for precise, straight cuts in predominantly mineral materials such as marble or granite. The powerful 1,750 W motor with stepless speed control (1,700–6,800 rpm) keeps the speed constant even under load thanks to soft start and electronics, while temperature-dependent overload protection reliably protects the motor.
The removable base plate with a sturdy stainless steel side stop ensures precisely guided cuts and can be combined with the GADIA LINE rail system; with the base plate removed, freehand cuts up to 57 mm deep are possible. The ergonomic “Ergotec” D-handle with vibration damping provides a secure, low-fatigue grip throughout the working day.
For stonemasons and specialist companies looking for a precise, rugged wet stone cutter for professional natural stone work, the WETCUT 180/3 is the right choice.
Removable guide carriage with sturdy stainless steel side stop
Soft start and electronics keep the speed constant even under heavy load
Removable base plate allows freehand cutting beyond the regular depth of 52 mm.
Two service flaps allow easy replacement of the carbon brushes without a trip to the workshop.
Wet stone cutter for cutting and slotting predominantly mineral materials such as marble or granite, guided horizontally with the guide carriage resting firmly on the workpiece. Particularly suitable for stonemasons and specialist companies in professional natural stone work. Not suitable for polishing.
Power input: 1,750 W
Voltage: 230 / 115 V (see variants)
Operating mode: Wet
Speed control: Variable, stepless
Speed: 1,700–6,800 rpm
Tool Ø max.: 180 mm
Cutting depth max.: 52 mm (57 mm without base plate, freehand)
Tool mount: M14 / Ø 22.2 mm
Weight: 6.0 kg
1 x silicone mains cable 4 m
1 x water hose 2.5 m with brass quick coupling
1 x guard with height-adjustable cover
1 x water regulating valve
3 x markers,
1 x removable guide shoe
1 x removable magnetic felt pad
1 x side stop
1 x Ergotec D-handle PRCD safety switch or CEE plug
1 x cable hose connector with velcro fastener
1 x flange and clamping nut
1 x pin spanner,
1 x case.
GADIA Ceram-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for porcelain stoneware, ceramics and 2 cm patio slabs.
From: 89,00 €
GADIA Ultra-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for concrete and universal building materials with a balanced ratio of cut quality, speed and service life.
From: 37,00 €
GADIA-Cut Cutting Discs
(Varianten)
High-quality diamond cutting discs for precise and efficient cutting work in concrete, natural stone, tiles and other building materials.
From: 23,00 €
GADIA Sprint-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for fast cutting work in concrete and hard building materials with high cutting speed and good service life.
From: 61,00 €
GADIA Turbo-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for cutting work in hard material.
From: 81,00 €
GADIA Easy-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for precise cutting work in porcelain stoneware, ceramics and hard tiles.
From: 61,00 €
GADIA Line Rail System
(Varianten)
GADIA LINE rail system for the Wetcut 180/3 – slide rails, basic sets, suction cups and adapter: the straight road to precise cuts.
From: 63,00 €
Connecting Adapter Turbocut 160 / Wetcut 180/3
Art.Nr.: 036.128
Guiding and connecting part for the Turbocut 160 (aluminium rail system) and Wetcut 180/3 (GADIA Line).
63,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: cutting or slotting predominantly mineral materials (e.g. marble, granite) with the guide carriage resting firmly on the workpiece, horizontally, in wet cutting. Not suitable for polishing. Use only accessories approved by the manufacturer.
Personal protective equipment must be worn during operation: safety goggles or a full face shield (depending on the application) and hearing protection. A dust mask, protective gloves and a special apron are recommended depending on the application.
Noise emission: sound pressure level 88 dB(A), sound power level 101 dB(A) – hearing protection required. Vibration: 7 m/s².
The machine is built to protection class II and, as it is also intended for wet areas, may only be operated in conjunction with an isolating transformer or a PRCD safety switch in accordance with the applicable regulations.
The tool spindle continues to run after switching off — only put the machine down once it has come to a complete standstill.
For complete safety instructions, see the original operating instructions.
