Smart Cutter 1700 Plus

SKU 003.036.607

The most powerful model in the SMART CUTTER PLUS series: 1,750 W, cutting discs up to Ø 150 mm, 40 mm cutting depth – with extraction hood and removable guide plate.

  • 1,750 W
  • 230 / 115 V (depending on version)
  • Dry
  • Variable (VARIO), 7 speed settings A–G

758,00 €

Suitable for

Applications
Material
  • Marble
  • granite
  • engineered stone
  • porcelain stoneware
  • ceramics
  • glass
  • sandstone
Work
  • Dry cutting up to 40 mm cutting depth
  • pulling cut
  • discs up to Ø 150 mm
  • guided cuts on the rail
Users
  • Tilers
  • stonemasons
  • renovators
  • floor renovators
  • restorers
  • sculptors
Not suitable
  • Wet work – dry only

Made in Germany – for professional continuous use

  • Cutting up to 40 mm deepdry stone cutter for natural stone, engineered stone and porcelain stoneware, discs up to Ø 150 mm – freehand along the guide edge or guided.
  • Most powerful model of the series1,750 W motor power, the electronics hold the speed even under load.
  • Speed in 7 settings A–G1,700–6,800 rpm – a speed range designed for cutting.
  • Silicone mains cable in a signal colourwear- and break-resistant and clearly visible on site, machine available in 230 V or 115 V.
  • Gentle start, protected against overloadsoft start when switching on and temperature-dependent overload protection for the motor.
  • Cutting depth set exactlycentral fine adjustment with side lock, plus stepless cutting depth on the guide plate.
  • Low-dust cuttingguard with extraction port for a clear view of the cut, swivel joint on the vacuum cleaner connector Ø 36–46 mm against twisted hoses.
  • Removable guide platewith side stop for tile and stone strips, fitting for the GALESKI rail system and FIXTEC disc change.

The most powerful model in the series – 1,750 W for 40 mm cutting depth.

SMART CUTTER 1700 VARIO PLUS

The SMART CUTTER 1700 PLUS is the largest and most powerful model of the SMART CUTTER PLUS series. Its 1,750 W motor drives cutting discs up to Ø 150 mm and achieves 40 mm cutting depth – with speed control in 7 settings A–G from 1,700 to 6,800 rpm.
The central cutting depth fine adjustment with side lock ensures exact cuts, and the removable guide plate maximum versatility: freehand along the guide edge, with a side stop for strips or on the GALESKI rail system. Despite the dust extraction, there is a good clear view into the cutting area; the freely rotating extraction connector prevents twisted hoses.
The powerful choice for tilers, stonemasons and renovators who need deep, precise and low-dust dry cuts – in 230 V or 115 V.

Power1,750 W
Voltage230 / 115 V (depending on version)
Operating conditionDry
Speed controlVariable (VARIO), 7 speed settings A–G
Speed1,700–6,800 rpm
Tool Ø max.150 mm
Cutting depth max.40 mm
Spindle threadM14 / Ø 22.2 mm
Weight3.9 kg
ProtectionSoft start, overload protection
  • 1 x silicone mains cable 4 m
  • 1 x guard with rotating vacuum cleaner connector Ø 36–46 mm
  • 1 x removable guide plate with connection for guide rail
  • 1 x side stop
  • 1 x plastic Velcro pad
  • 1 x clamping flange
  • 1 x FIXTEC flange nut
  • 1 x ball handle
  • in a case

Frequently asked questions about the series

Eco or Plus?
The Plus versions have a removable guide plate – for setting the cutting depth and for the GALESKI rail system. The Eco has no guide plate and is particularly handy.
How deep does the SMART CUTTER cut?
SMART CUTTER 125 BL up to 20 mm, SMART CUTTER 1500 up to 25 mm, SMART CUTTER 1700 Plus with discs up to Ø 150 mm up to 40 mm.
Which cutting discs fit?
GADIA-Cut cutting discs with 22.2 mm bore, M14 spindle thread – in the size of the model.
How do I work with little dust?
Via the extraction hood with vacuum cleaner connection – with a clear view of the cut.

Product safety

Manufacturer: Galeski Manufaktur Innovative Maschinen - Peter Galeski e.K.
Boschstr. 4, 56457 Westerburg, Germany
info@galeski.de
Warnings and safety information:

For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: parting or cutting predominantly mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for dry use only. Use diamond cutting discs only; always work with the guard fitted and a powerful dust extraction system connected.
Personal protective equipment is mandatory during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended.
Noise emission: sound pressure level 87 dB(A), sound power level 100 dB(A) – hearing protection required. Vibration: 7 m/s².
Dust produced when working stone containing crystalline silica is hazardous to health. Material containing asbestos must not be processed.
Sockets in outdoor areas must be fitted with residual current devices (RCD).
Only use accessory tools up to Ø 150 mm whose permissible speed is at least equal to the maximum speed of the machine.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions. General safety instructions as PDF (15 languages)

Cookie Consent with Real Cookie Banner