Basic slide rail set 100 cm with two suction cups – with rubber lever suction cups for smooth or with vacuum suction cups (Venturi) for rough surfaces.
From: 249,00 €
The basic set is the quickest way into the GALESKI rail system: a 100 cm slide rail, ready with two suction cups. On polished, smooth slabs, rubber lever suction cups hold the rail; on rough, flamed or bush-hammered surfaces, vacuum suction cups with a Venturi system on the compressed air connection ensure a secure hold.
Basic set smooth: 100 cm, 2 rubber lever suction cups Ø 90 mm
Basic set rough: 100 cm, 2 vacuum suction cups Ø 80 mm, Venturi system for connection to compressed air
For Turbocut 160 DCS, Lioncut 200 Dry Plus, Lioncut 200 Combi Plus, Smart Cutter 125 Plus BL, Smart Cutter 1500 Vario Plus and Smart Cutter 1700 Vario Plus. Additional suction cups for rail extensions: suction cup for aluminium rail. Part of the Aluminium Rail System.
Turbocut 160 DCS
(Varianten)
Dry stone cutter with integrated dust extraction (Dust Control System) – low-dust without an additional vacuum cleaner, with guide plate, up to 40 mm cutting depth.
1.142,00 €
Lioncut 200 Dry Plus
(Varianten)
Professional dry cutter with mountable guide plate and extraction connection – freehand or with the GALESKI rail system, up to 63 mm cutting depth.
1.295,00 €
Lioncut 200 Combi Plus
(Varianten)
Professional wet and dry cutter with mountable guide plate, extraction connection and convertible water supply – up to 63 mm cutting depth.
From: 1.428,00 €
Smart Cutter 125 Plus BL
Art.Nr.: 003.036.602BL
Brushless stone cutter with extraction hood and removable guide plate – freehand, guided, with side stop or on the GALESKI rail system.
598,00 €
Smart Cutter 1500 Vario Plus
Art.Nr.: 003.036.612
Powerful stone cutter with extraction hood and removable guide plate – freehand, guided, with side stop or on the GALESKI rail system.
658,00 €
Smart Cutter 1700 Vario Plus
(Varianten)
The most powerful model in the SMART CUTTER PLUS series: 1,750 W, cutting discs up to Ø 150 mm, 40 mm cutting depth – with extraction hood and removable guide plate.
758,00 €
This accessory is intended for use with compatible Galeski machines and is not a stand-alone power tool. There are no separate operating instructions for this product – the safety and operating instructions of the machine used apply; read and follow them carefully before use.
Check for damage, wear and secure fit before each use. Do not continue to use damaged or worn parts.
Use only with suitable and approved machines; do not exceed the permissible speed or load of the machine used.
Wear personal protective equipment when working: depending on the application, eye protection or safety goggles, hearing protection, a dust mask and protective gloves.
Keep out of the reach of children and do not allow children to use it.
