Smart Cutter 1500

SKU 003.036.612

Light dry stone cutter with extraction hood and vacuum cleaner connector for pulling cuts up to 25 mm deep – as Eco for one-handed use, as Plus with removable guide plate, side stop and connection for the GALESKI rail system.

  • 1,520 W
  • 2,700–9,500 rpm
  • 125 mm
  • 2.6 kg

From: 506,00 €

Spare parts here

Suitable for

Applications
Material
  • Marble
  • granite
  • engineered stone
  • porcelain stoneware
  • ceramics
  • glass
  • sandstone
Work
  • Dry cutting up to 25 mm cutting depth
  • pulling cut
  • discs up to Ø 125 mm
  • guided cuts on the rail (Plus)
Users
  • Tilers
  • stonemasons
  • renovators
  • floor renovators
  • restorers
  • sculptors
Not suitable
  • Wet work – dry only

Made in Germany – for professional continuous use

  • Pulling cut along the guide edgeplace, plunge in square, pull through – dry cuts in natural stone, engineered stone and porcelain stoneware up to 25 mm deep.
  • Power at constant speed1,520 W motor power, the electronics hold the speed even under load.
  • Speed in 7 settings A–G2,700–9,500 rpm – a speed range designed for cutting.
  • Silicone mains cable in a signal colourwear- and break-resistant and clearly visible on site.
  • Gentle start, protected against overloadsoft start when switching on and temperature-dependent overload protection for the motor.
  • Light and quickly set up2.0 kg (Eco, also one-handed) or 2.6 kg (Plus), spindle lock for easy tool changes.
  • Low-dust cuttingguard with extraction port for a clear view of the cut, swivel joint on the vacuum cleaner connector Ø 36–46 mm against twisted hoses.
  • Guide plate on the Plus versionremovable, with stepless cutting depth, side stop, fitting for the GALESKI rail system and FIXTEC disc change.

Light, low dust, precise – the stone cutter for the pulling cut. As Eco or Plus.

SMART CUTTER 1500 VARIO PLUS

The SMART CUTTER 1500 is a powerful yet particularly light dry stone cutter for natural and engineered stone, porcelain stoneware and ceramics. The 1,520 W motor works in 7 settings A–G from 2,700 to 9,500 rpm, and soft start and electronics keep the speed constant even under load. The open guard with extraction port gives a clear view of the cut and extracts the dust directly, and the swivel joint on the vacuum cleaner connector keeps the hose free. With the guide edge you plunge in square and pull the cut precisely to the end – up to 25 mm deep.

The Eco version is the light one-handed machine for fast, clean cuts. The Plus version comes with a removable guide plate: with it you cut with stepless cutting depth, with a side stop for tile and stone strips or on the GALESKI rail system – and change the disc without tools thanks to FIXTEC. For tilers, stonemasons and renovators who want to cut quickly and cleanly.

Power1,520 W
Voltage230 V
Operating conditionDry
Speed controlVariable (VARIO), 7 speed settings A–G
Speed2,700–9,500 rpm
Tool Ø max.125 mm
Cutting depth max.25 mm
Spindle threadM14 / Ø 22.2 mm
Weight2.6 kg
ProtectionSoft start, overload protection
Rail systemyes
PackagingCase
  • 1 x silicone mains cable 4 m
  • 1 x guard with rotating vacuum cleaner connector Ø 36–46 mm
  • 1 x removable guide plate with connection for guide rail
  • 1 x side stop
  • 1 x plastic Velcro pad
  • 1 x clamping flange
  • 1 x FIXTEC flange nut
  • 1 x ball handle
  • in a case

Spare parts Smart Cutter 1500

Click a number in the drawing – the part is marked in the list. 86 parts, ready to order. Applies to item no. 003.036.612.

Exploded view Smart Cutter 1500 Plus with position numbers
Move the drawing sideways, tap a number
86 parts
Spare parts Smart Cutter 1500 Plus
Pos.PartPriceCart
1Handle assembledItem no. 000.513A

14,00 €

Add to cart
2ScrewItem no. DI093308035VZ8

1,50 €

Add to cart
3HandleItem no. 000.513

10,00 €

Add to cart
4Rubber coatingItem no. 150.008.001

4,50 €

Add to cart
5ExtensionItem no. 150.008.000

4,50 €

Add to cart
6Gearbox complete incl. Pos. 7-10Item no. 101.158

47,00 €

Add to cart
7Pressure buttonItem no. 100.681

1,10 €

Add to cart
8Pressure springItem no. 100.680

0,80 €

Add to cart
9Locking boltItem no. 100.679

5,40 €

Add to cart
10Needle bushItem no. 100.718

4,00 €

Add to cart
11Screw4× installedItem no. 111.470.415

0,65 €

Add to cart
12NutItem no. 100.721

2,80 €

Add to cart
13Gear wheel setItem no. 100.722

43,50 €

Add to cart
14WasherItem no. DI013708VZ

0,30 €

Add to cart
15BearingItem no. 100.645

10,00 €

Add to cart
16Disc 0,5mmItem no. 100.682

1,30 €

Add to cart
17DiscItem no. 100.677

2,00 €

Add to cart
18Washer 0,3mmItem no. 100.724A

2,00 €

Add to cart
19Locking ringItem no. 100.678

2,00 €

Add to cart
20Armature 230V complete incl. Pos.21-23Item no. 100.706

88,00 €

Add to cart
21Isolating discItem no. 101.110

5,20 €

Add to cart
22BearingItem no. 101.108

9,00 €

Add to cart
23Magnetic discItem no. 100.703

7,00 €

Add to cart
24Rubber sleeveItem no. 100.655

2,95 €

Add to cart
25Intermediate flangeItem no. 101.118

3,25 €

Add to cart
26Electrical field 230VItem no. 101.134

70,00 €

Add to cart
27HousingItem no. 100.650

11,00 €

Add to cart
28SringItem no. 100.651

1,00 €

Add to cart
29Guide pieceItem no. 100.653

10,00 €

Add to cart
30SliderItem no. 100.652

2,20 €

Add to cart
31ScrewItem no. 100.675

0,70 €

Add to cart
33Screw2× installedItem no. 100.661

0,60 €

Add to cart
34Cord clampItem no. 101.122

0,50 €

Add to cart
35Terminal stripItem no. 100.674

0,66 €

Add to cart
36Electronic VARIO (variable) 230VItem no. 101.127

62,00 €

Add to cart
37Brush holder2× installedItem no. 100.649

3,10 €

Add to cart
38Replacement Carbon Brushes (Pair) - 230 VoltItem no. 100.637

8,90 €

Add to cart
39Protetion hoseItem no. 101.513

2,20 €

Add to cart
40Housing cap VARIOItem no. 100.672

5,15 €

Add to cart
41ScrewItem no. 100.662

0,55 €

Add to cart
42CordItem no. 100.821

28,00 €

Add to cart
43Washer4× installedItem no. 100.078

0,40 €

Add to cart
44Compensating discItem no. 101.544

0,70 €

Add to cart
45End plateItem no. 100.768

14,50 €

Add to cart
46Covering washerItem no. 100.792

0,65 €

Add to cart
47Screw4× installedItem no. 100.765

0,55 €

Add to cart
48Protective hoodItem no. 101.538B

12,70 €

Add to cart
49Screw2× installedItem no. 111.440.509

0,70 €

Add to cart
50Swpring plateItem no. 101.518

2,80 €

Add to cart
51Screw3× installedItem no. 100.766

0,60 €

Add to cart
52SpindleItem no. 100.793

10,30 €

Add to cart
53Screw2× installedItem no. 111.490.403

0,75 €

Add to cart
54FlangeItem no. 101.520

7,20 €

Add to cart
55Flange, goldItem no. 101.520A

9,45 €

Add to cart
56FIXTEC Flange Nut – up to Ø 180 mmItem no. 017.636

25,00 €

Add to cart
57Depth adjuster, completeItem no. 150.008.003

12,00 €

Add to cart
58WasherItem no. 105049

1,20 €

Add to cart
59SpringItem no. 160.000.060

7,25 €

Add to cart
60KnobItem no. 150.008.002

7,50 €

Add to cart
61ScrewItem no. 111.480.816

2,50 €

Add to cart
62Guide pieceItem no. 150.008.007

60,40 €

Add to cart
63Nut M6Item no. 103.053

0,35 €

Add to cart
64Knurled screwItem no. 116.000.016

2,90 €

Add to cart
65BaseItem no. 150.008.011

61,45 €

Add to cart
66Screw3× installedItem no. 111.240.506

0,40 €

Add to cart
67Felt padItem no. 150.008.013

8,50 €

Add to cart
68Smart Cutter Plastic Velcro PadItem no. 003.036.604

22,00 €

Add to cart
69Clamping leverItem no. 116.000.015

13,15 €

Add to cart
70Washer M5Item no. 150.008.005

1,80 €

Add to cart
71Multi unitItem no. 150.008.006

91,90 €

Add to cart
72PipeItem no. 150.008.009

7,50 €

Add to cart
73Threaded rodItem no. 150.008.010

7,50 €

Add to cart
74Plastic discItem no. 150.008.012

2,50 €

Add to cart
75Knurled nutItem no. 405800404

8,45 €

Add to cart
76Connecting pipeItem no. 150.008.020

14,50 €

Add to cart
77Velcro stripItem no. 160.000.030

5,75 €

Add to cart
78Hose connectorItem no. 150.008.039

9,00 €

Add to cart
79HoseItem no. 150.008.016

6,50 €

Add to cart
80Thread inlayItem no. 150.004.008

8,40 €

Add to cart
81AdaptorItem no. 150.002.032

22,00 €

Add to cart
82Guide assembledItem no. 150.008.017

24,00 €

Add to cart
83ScaleItem no. 150.008.018

12,00 €

Add to cart
84GuideItem no. 150.008.019

9,00 €

Add to cart
85Nut2× installedItem no. 112.000.005

0,40 €

Add to cart
86Screw2× installedItem no. 111.100.511

0,85 €

Add to cart
87Grease 16gItem no. 024.415D

8,00 €

Add to cart

Exploded view as of 19.05.2022 · Drawing and list as PDF · Spare parts search for all machines

Click a number: the part is marked in the list.

Frequently asked questions about the series

Eco or Plus?
The Plus versions have a removable guide plate – for setting the cutting depth and for the GALESKI rail system. The Eco has no guide plate and is particularly handy.
How deep does the SMART CUTTER cut?
SMART CUTTER 125 BL up to 20 mm, SMART CUTTER 1500 up to 25 mm, SMART CUTTER 1700 Plus with discs up to Ø 150 mm up to 40 mm.
Which cutting discs fit?
GADIA-Cut cutting discs with 22.2 mm bore, M14 spindle thread – in the size of the model.
How do I work with little dust?
Via the extraction hood with vacuum cleaner connection – with a clear view of the cut.

Product safety

Manufacturer: Galeski Manufaktur Innovative Maschinen - Peter Galeski e.K.
Boschstr. 4, 56457 Westerburg, Germany
info@galeski.de
Warnings and safety information:

For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: parting or cutting predominantly mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for dry use only. Use diamond cutting discs only; always work with the guard fitted and a powerful dust extraction system connected.
Personal protective equipment is mandatory during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended.
Noise emission: sound pressure level 89 dB(A), sound power level 102 dB(A) – hearing protection required. Vibration: 5 m/s².
Dust produced when working stone containing crystalline silica is hazardous to health. Material containing asbestos must not be processed.
Sockets in outdoor areas must be fitted with residual current devices (RCD).
Only use accessory tools up to Ø 125 mm whose permissible speed is at least equal to the maximum speed of the machine.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions. General safety instructions as PDF (15 languages)

Cookie Consent with Real Cookie Banner