Brushless · Dry

Smart Cutter 125 BL

SKU 003.036.600BL

Handy brushless stone cutter with extraction hood and vacuum cleaner connector for pulling cuts up to 20 mm deep – as Eco slim and light for freehand use, as Plus with removable guide plate, side stop and connection for the GALESKI rail system.

  • 1,400 W
  • 1,600–6,400 rpm
  • 125 mm
  • 2.8 kg

From: 465,00 €

Spare parts here

Suitable for

Applications
Material
  • Marble
  • granite
  • engineered stone
  • porcelain stoneware
  • ceramics
  • glass
  • sandstone
Work
  • Dry cutting up to 20 mm cutting depth
  • pulling cut
  • discs up to Ø 125 mm
  • guided cuts on the rail (Plus)
Users
  • Tilers
  • stonemasons
  • renovators
  • floor renovators
  • restorers
  • sculptors
Not suitable
  • Wet work – dry only

Made in Germany – for professional continuous use

  • Pulling cut along the guide edgeplace, plunge in square, pull through – dry cuts in natural stone, engineered stone and porcelain stoneware up to 20 mm deep.
  • Brushless motor without carbon brushes1,400 W without brush changes, up to 30 % higher efficiency and more torque in the lower speed range.
  • Speed in 6 settings 1–61,600–6,400 rpm – a speed range designed for cutting.
  • Cool and long-lastingconsiderably less heat even at full load and a service life well above that of ordinary branded machines.
  • Safe start, quick stopsoft start and restart cutout, when switched off the magnetic motor brakes the disc quickly.
  • Light and quickly set up2.8 kg (Eco, also one-handed) or 3.3 kg (Plus), spindle lock for easy tool changes.
  • Low-dust cuttingguard with extraction port for a clear view of the cut, swivel joint on the vacuum cleaner connector Ø 36–46 mm against twisted hoses.
  • Guide plate on the Plus versionremovable, with stepless cutting depth, side stop, fitting for the GALESKI rail system and FIXTEC disc change.

Brushless power in a small format – low dust and precise in the pulling cut. As Eco or Plus.

SMART CUTTER 125 PLUS BL

The SMART CUTTER 125 BL is the handy stone cutter for clean cuts in natural and engineered stone, porcelain stoneware and ceramics. Its brushless magnetic motor works without carbon brushes – no brush changes, up to 30 % more efficiency, considerably more torque in the lower speed range and noticeably less heat, even at full load. The open guard with extraction port gives an optimal view of the cut with convincing dust extraction; the swivel joint on the vacuum cleaner connector prevents twisted hoses. For square cuts, place the guide edge of the extraction port on the work, plunge in and pull the cut cleanly to the end – up to 20 mm deep. When switched off, the magnetic motor brakes the disc quickly.

The Eco version is slim and light – at 2.8 kg ideal for freehand use. The Plus version comes with a removable guide plate: with it you cut with stepless cutting depth, with a side stop for tile and stone strips or on the GALESKI rail system – and change the disc without tools thanks to FIXTEC. For tilers, stonemasons and renovators who want to work precisely and with little dust.

Power1,400 W
Voltage230 V
Operating conditionDry
Speed controlVariable (VARIO), 6 speed settings 1–6
Speed1,600–6,400 rpm
Tool Ø max.125 mm
Cutting depth max.20 mm
Spindle threadM14 / Ø 22.2 mm
Weight2.8 kg
ProtectionSoft start, restart cutout
Rail systemno
PackagingBox
  • 1 x rubber mains cable 4 m
  • 1 x guard with rotating vacuum cleaner connector Ø 36–46 mm
  • 1 x clamping flange
  • 1 x flange nut
  • 1 x pin spanner
  • 1 x ball handle
  • in a box

Spare parts Smart Cutter 125 BL

Click a number in the drawing – the part is marked in the list. 60 parts, ready to order. Applies to item no. 003.036.600BL.

Exploded view Smart Cutter 125 BL Eco (V2) with position numbers
Move the drawing sideways, tap a number
60 parts
Spare parts Smart Cutter 125 BL Eco (V2)
Pos.PartPriceCart
1Handle assembledItem no. 000.513A

14,00 €

Add to cart
2ScrewItem no. DI093308035VZ8

1,50 €

Add to cart
3HandleItem no. 000.513

10,00 €

Add to cart
4ExtensionItem no. 150.008.000

4,50 €

Add to cart
5Rubber coatingItem no. 150.008.001

4,50 €

Add to cart
6Gear box complete incl. Pos. 7-10Item no. 150.011.000

92,60 €

Add to cart
7Pressure buttonItem no. 100.681

1,10 €

Add to cart
8Pressure springItem no. 100.680

0,80 €

Add to cart
9Locking boltItem no. 100.679

5,40 €

Add to cart
10SleeveItem no. 100.718

4,00 €

Add to cart
11Screw4× installedItem no. 100.660

0,60 €

Add to cart
12O-ring 26,2x2,4Item no. 150.011.001

1,20 €

Add to cart
13NutItem no. 100.721

2,80 €

Add to cart
14Set: pinion+gear wheelItem no. 100.722

43,50 €

Add to cart
15BearingItem no. 150.011.002

10,00 €

Add to cart
16O-ring 26x2,2Item no. 150.011.003

1,20 €

Add to cart
17Middle coverItem no. 150.011.004

15,00 €

Add to cart
18Armature 230V complete incl. Pos. 19Item no. 150.011.005

70,00 €

Add to cart
19BearingItem no. 101.108

9,00 €

Add to cart
20Screw2× installedItem no. 150.011.006

1,00 €

Add to cart
21Wind ringItem no. 150.011.007

9,00 €

Add to cart
22Electrical field 230VItem no. 150.011.008

50,00 €

Add to cart
23HousingItem no. 150.011.009

15,40 €

Add to cart
24Round pin 2x18Item no. 150.011.011

0,75 €

Add to cart
25Push button switch complete incl. Pos. 24Item no. 150.011.027

1,50 €

Add to cart
26Switch levelItem no. 150.011.058

4,50 €

Add to cart
27Switch return springItem no. 150.011.014

0,75 €

Add to cart
28O-ring 10x3Item no. 150.011.015

1,20 €

Add to cart
29Electronic VARIO (variable) 230VItem no. 150.011.059

118,00 €

Add to cart
30Cord clampItem no. 150.011.024

1,30 €

Add to cart
31ScrewItem no. 150.011.025

0,75 €

Add to cart
32Screw 4x162× installedItem no. 150.011.016

1,30 €

Add to cart
33Screw 4x65Item no. 150.011.019

1,30 €

Add to cart
34Protection hoseItem no. 150.011.064

4,80 €

Add to cart
35Rear coverItem no. 150.011.061

7,80 €

Add to cart
36Intake hood leftItem no. 150.011.063

4,80 €

Add to cart
37Intake hood rightItem no. 150.011.062

4,80 €

Add to cart
38Cable connector2× installedItem no. 100.187

0,80 €

Add to cart
39Cord with Schuko plugItem no. 100.821

28,00 €

Add to cart
40Compensating discItem no. 101.544

0,70 €

Add to cart
41O-ringItem no. 101.516

0,60 €

Add to cart
42End plateItem no. 100.768

14,50 €

Add to cart
43Covering washerItem no. 100.792

0,65 €

Add to cart
44Screw4× installedItem no. 100.765

0,55 €

Add to cart
45Protective hoodItem no. 101.538D

12,70 €

Add to cart
46Screw2× installedItem no. 111.440.509

0,70 €

Add to cart
47Spring plateItem no. 101.518

2,80 €

Add to cart
48Screw3× installedItem no. 100.766

0,60 €

Add to cart
49SpindleItem no. 100.793

10,30 €

Add to cart
50FlangeItem no. 101.520

7,20 €

Add to cart
51Flange nutItem no. 100.754

7,50 €

Add to cart
52Suction baseItem no. 150.008.030

91,90 €

Add to cart
53Velcro stripItem no. 160.000.030

5,75 €

Add to cart
54Hose connectorItem no. 150.008.032

9,00 €

Add to cart
55HoseItem no. 150.008.033

9,00 €

Add to cart
56Thread inlayItem no. 150.004.008

8,40 €

Add to cart
57AdaptorItem no. 150.002.032

22,00 €

Add to cart
58Grease 16gItem no. 024.415D

8,00 €

Add to cart
59Two pin wrenchItem no. 000.082

6,00 €

Add to cart
60Case for Galeski Machines – Smart Cutter 1500Item no. 000.123not illustrated

49,00 €

Add to cart

Exploded view as of 15.05.2024 · Drawing and list as PDF · Spare parts search for all machines

Click a number: the part is marked in the list.

Frequently asked questions about the series

Eco or Plus?
The Plus versions have a removable guide plate – for setting the cutting depth and for the GALESKI rail system. The Eco has no guide plate and is particularly handy.
How deep does the SMART CUTTER cut?
SMART CUTTER 125 BL up to 20 mm, SMART CUTTER 1500 up to 25 mm, SMART CUTTER 1700 Plus with discs up to Ø 150 mm up to 40 mm.
Which cutting discs fit?
GADIA-Cut cutting discs with 22.2 mm bore, M14 spindle thread – in the size of the model.
How do I work with little dust?
Via the extraction hood with vacuum cleaner connection – with a clear view of the cut.

Product safety

Manufacturer: Galeski Manufaktur Innovative Maschinen - Peter Galeski e.K.
Boschstr. 4, 56457 Westerburg, Germany
info@galeski.de
Warnings and safety information:

For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: parting or cutting predominantly mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for dry use only. Use diamond cutting discs only; always work with the guard fitted and a powerful dust extraction system connected.
Personal protective equipment is mandatory during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended.
Noise emission: sound pressure level 83.6 dB(A), sound power level 94.6 dB(A) – hearing protection required. Vibration: 9.5 m/s².
Dust produced when working stone containing crystalline silica is hazardous to health. Material containing asbestos must not be processed.
Sockets in outdoor areas must be fitted with residual current devices (RCD).
Only use accessory tools up to Ø 125 mm whose permissible speed is at least equal to the maximum speed of the machine.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions. General safety instructions as PDF (15 languages)

Cookie Consent with Real Cookie Banner