GADIA Plus-Cut 150

SKU 029.042F

Diamond cutting disc Ø150 mm for precise cutting work in concrete and hard building materials, with high cut quality and long service life.

  • Diameter 150 mm
  • Bore 22.2 mm
  • Segment width 2.6 mm
  • Segment height 10 mm

From: 105,00 €

Compatibility

Suitable for angle grinders and cutting systems.

Diameter150 mm
Bore (version without flange)22.2 mm
Segment width2.6 mm
Segment height10 mm
Coreclosed
Operating conditionDry

Product safety

Manufacturer: Galeski Manufaktur Innovative Maschinen - Peter Galeski e.K.
Boschstr. 4, 56457 Westerburg, Germany
info@galeski.de
Warnings and safety information:

Diamond cutting disc for professional use by trained personnel. Before use, read these instructions and the operating instructions of the machine used carefully. Damaged, incorrectly mounted or improperly used tools can cause accidents. If anything is unclear, contact your dealer or the machine manufacturer beforehand.

Before use: Disconnect the machine from the power supply (pull the mains plug or remove the battery). Check tool and machine for damage; never use damaged tools (e.g. imbalance, lateral or radial runout, cracks, deformation). The tool must be suitable for the material to be worked. Do not use wet-cutting tools dry. Never exceed the maximum speed stated on the disc. Dimensions and mounting (bore or flange) must match the machine; only use on machines with a guard and check all safety devices. Do not modify tool or machine.

Mounting: Clean the mountings of machine and tool. Clamp the disc securely, firmly and centrally. The direction arrow on the disc must match the machine's direction of rotation. Before use, carry out a test run to rule out vibration, imbalance and incorrect mounting.

Use: Wear protective equipment: safety goggles, hearing protection, dust mask, safety shoes and gloves. Ensure a secure stance and a firmly clamped workpiece. No unprotected persons may stand in the line of discharge or in the immediate vicinity; keep away from flammable objects. Use cutting discs for straight cuts only: cutting curves, side grinding or pressure across the cutting direction can cause cracks or segment loss. Always start the machine at idle; do not set the disc down hard, do not tilt it and do not press too hard. Avoid overheating; interrupt the work if necessary. Resharpen clogged or blunt segments by making several cuts in a sharpening stone or abrasive stone. Working stone and concrete produces fine dust (crystalline silica is harmful to health): use dust extraction when cutting dry.

After use: Let the machine run down without touching it. Let the disc cool down away from flammable material and do not touch it (risk of burns). Store dry and protected, out of the reach of children.

Manufacturer's safety instructions as PDF (15 languages)

Cookie Consent with Real Cookie Banner