Generation 2 · Dry
Professional dry stone cutter with extraction hood and vacuum cleaner connection – 2,400 W, saw blades up to Ø 250 mm, 75 mm cutting depth.
From: 998,00 €
Belongs to: Dominator Series – Compare models
Dry cutting up to 75 mm deepdry saw with vacuum cleaner connection for natural stone, engineered stone and porcelain stoneware, saw blades up to Ø 250 mm.
Power for heavy dry cuts2,400 W motor, the electronics hold the speed even under load.
Constant speed 6,600 rpma speed range designed for cutting with large saw blades.
Gentle start, protected against overloadsoft start when switching on and temperature-dependent overload protection for the motor.
Ergotec anti-vibration handleplus a rubberised D-handle for safe, comfortable guidance even on deep cuts.
Cuts right up to the wallguard can be set forwards or backwards in detent positions, blade positionable centrally or at the outer edge of the guard.
Suction hose out of the wayopen hood with extraction port, freely rotating swivel joint, hose spacer, fixed hose guide and 1 m extraction hose.
Box or casedelivered in a box or a robust carrying case.
The DOMINATOR 250 is the professional stone cutter for large cutting depths: the generous guard takes saw blades up to Ø 250 mm and allows 75 mm cutting depth. The 2,400 W motor with 6,600 rpm provides the necessary power, while soft start, electronics and overload protection ensure reliable continuous use.
Despite its size, the hood remains open – for a clear view of the cut and convincing dust extraction, even close to the wall. Swivel joint, hose spacer, “Ergotec” anti-vibration handle and rubberised D-handle keep even heavy cuts well under control.
The choice for stonemasons, renovators and construction companies that cut deep and dry with little dust – in a box or case.
Material
Work
Not suitable| Power | 2,400 W |
|---|---|
| Voltage | 230 V |
| Operating condition | Dry |
| Speed control | Constant |
| Speed | 6,600 rpm |
| Tool Ø max. | 250 mm |
| Cutting depth max. | 75 mm |
| Spindle thread | M14 / Ø 22.2 mm |
| Weight | 8 kg |
| Protection | Soft start, overload protection |
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: cutting mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for dry processing only.
Personal protective equipment must be worn during operation: depending on the application, full face protection, eye protection or safety goggles as well as hearing protection; where appropriate, a dust mask, protective gloves or a special apron. The dust or respirator mask must filter the dust produced.
Noise emission: sound pressure level 96 dB(A), sound power level 107 dB(A), uncertainty K = 3 dB(A) – hearing protection required. Vibration: ah,SG 8.3 m/s² (surface grinding), ah,DS 4.1 m/s² (sanding sheet), uncertainty K = 1.5 m/s²; other values may occur during abrasive cutting.
Sockets in damp rooms and outdoor areas must be fitted with residual current devices (RCD, PRCD).
Only use tools up to Ø 250 mm whose permissible speed is at least equal to the maximum speed of the machine.
For complete safety instructions, see the original operating instructions.
