Professional dry stone cutter with extraction hood and vacuum cleaner connection – 2,400 W, saw blades up to Ø 250 mm, 75 mm cutting depth.
From: 998,00 €
The DOMINATOR 250/2 is the professional stone cutter for large cutting depths: the generously sized guard takes saw blades up to Ø 250 mm and allows a cutting depth of 75 mm. The 2,400 W motor at 6,600 rpm delivers the power required, while soft start, electronics and overload protection ensure reliable continuous use.
Despite its size, the guard has an open design – for a clear view of the cut and convincing dust extraction, even close to walls. Swivel joint, hose spacer, “Ergotec” anti-vibration handle and rubberised D-handle keep even heavy cuts well under control.
The choice for stonemasons, renovators and construction companies who make deep, low-dust dry cuts – in a box or a case.
Saw blades up to Ø 250 mm – power for heavy dry cuts.
Extraction port with swivel joint, 1 m extraction hose and fixed hose guide.
Adjustable guard and outer blade position allow cutting close to walls.
Plus a rubberised D-handle – for safe guidance even with large discs.
Dry stone cutter for natural and engineered stone processing, e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone. Particularly suitable for tilers, stonemasons, renovators, floor renovators, restorers and sculptors. For dry use only, with diamond cutting discs and a vacuum cleaner.
Power input: 2,400 W
Voltage: 230 V
Operating mode: Dry
Speed: 6,600 rpm
Tool Ø max.: 250 mm
Cutting depth max.: 75 mm
Spindle thread: M14 / Ø 22.2 mm
Weight: 8.0 kg
Soft start, overload protection
1 x silicone mains cable 4 m
1 x aluminium guard with plastic inserts and vacuum cleaner connector
1 x stainless steel flange
1 x stainless steel flange nut with 6 fixing holes and screws
1 x extraction hose 1 m, inner Ø 36 mm
1 x cable-hose connector with Velcro fastener
4 x shims
1 x open-end spanner AF 32
1 x counter holder
1 x rubberised D-handle
in a box or case (depending on variant)
GADIA Ceram-Cut 250
Art.Nr.: 029.165
Diamond cutting disc Ø250 mm for porcelain stoneware, ceramics and 2 cm patio slabs.
From: 147,00 €
GADIA Easy-Cut 250
Art.Nr.: 029.525
Diamond cutting disc Ø250 mm for precise cutting work in porcelain stoneware, ceramics and hard tiles.
From: 101,00 €
GADIA Multi-Cut 250
Art.Nr.: 029.146
Diamond cutting disc Ø250 mm for hard to very hard ceramic materials.
From: 117,00 €
GADIA-Cut Cutting Discs
(Varianten)
High-quality diamond cutting discs for precise and efficient cutting work in concrete, natural stone, tiles and other building materials.
From: 23,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: cutting mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for dry processing only.
Personal protective equipment must be worn during operation: depending on the application, full face protection, eye protection or safety goggles as well as hearing protection; where appropriate, a dust mask, protective gloves or a special apron. The dust or respirator mask must filter the dust produced.
Noise emission: sound pressure level 96 dB(A), sound power level 107 dB(A), uncertainty K = 3 dB(A) – hearing protection required. Vibration: ah,SG 8.3 m/s² (surface grinding), ah,DS 4.1 m/s² (sanding sheet), uncertainty K = 1.5 m/s²; other values may occur during abrasive cutting.
Sockets in damp rooms and outdoor areas must be fitted with residual current devices (RCD, PRCD).
Only use tools up to Ø 250 mm whose permissible speed is at least equal to the maximum speed of the machine.
For complete safety instructions, see the original operating instructions.
