Wet and dry stone cutter with two guards for one motor: splash guard with water supply and extraction hood for low-dust dry cuts – 1,750 W, cutting discs up to Ø 180 mm, cutting depth up to 58 mm.
From: 885,00 €
The DUOCUT-SET turns one stone cutter into two: based on the ECOMAX 180 Vario, the machine additionally comes with the dust extraction guard of the DOMINATOR 180. With the splash guard and finely adjustable water supply you cut wet or dry; with the extraction hood and a vacuum cleaner you make low-dust dry cuts – even close to walls.
The 1,750 W motor runs with infinitely variable speed from 1,700 to 6,800 rpm; soft start and electronics keep the speed constant even under load. Cutting discs up to Ø 180 mm, cutting depth up to 58 mm.
For tilers, stonemasons, renovators and restorers who want to stay flexible – with PRCD (DI) or CEE plug for the transformer.
Splash guard for wet and dry, extraction hood for low-dust dry cuts.
Water supply via adjustable jointed hose, flow finely adjustable with a regulating valve.
Extraction connector with swivel joint and hose spacer – also for cutting close to walls.
Cutting discs up to Ø 180 mm and 1,750 W for deep cuts.
Wet and dry stone cutter for natural and engineered stone processing, e.g. natural stone, engineered stone, ceramics and concrete. Particularly suitable for tilers, stonemasons, renovators, floor renovators, restorers and sculptors.
With the standard guard wet or dry (without dust extraction); with the extraction hood for dry cutting with a vacuum cleaner.
Power input: 1,750 W
Voltage: 230 or 115 V
Operating mode: Wet and dry
Speed: 1,700–6,800 rpm (infinitely variable)
Tool Ø max.: 180 mm
Cutting depth max.: 58 mm
Spindle thread / bore: M14 / 22.2 mm
Weight: 4.6 kg (without cutting disc)
Soft start, overload protection
1 x silicone mains cable 4 m with PRCD safety switch (DI) or CEE plug
1 x water hose 2.5 m with brass quick coupling
1 x water regulating valve
1 x jointed hose
1 x adjustable guard with removable front cover
1 x aluminium guard with plastic inserts and vacuum cleaner connector
1 x extraction hose 65 cm, inner Ø 32 mm
1 x flange and flange nut
1 x pin spanner
1 x socket wrench Ø 6 mm
1 x cable-hose connector with Velcro fastener
4 x shims
1 x rubberised D-handle
1 x splash guard
In a box
GADIA Ultra-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for concrete and universal building materials with a balanced ratio of cut quality, speed and service life.
From: 37,00 €
GADIA-Cut Cutting Discs
(Varianten)
High-quality diamond cutting discs for precise and efficient cutting work in concrete, natural stone, tiles and other building materials.
From: 23,00 €
GADIA Sprint-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for fast cutting work in concrete and hard building materials with high cutting speed and good service life.
From: 61,00 €
GADIA Turbo-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for cutting work in hard material.
From: 81,00 €
GADIA Abrasiv-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for abrasive building materials such as asphalt and screed.
From: 62,00 €
GADIA Easy-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for precise cutting work in porcelain stoneware, ceramics and hard tiles.
From: 61,00 €
GADIA Ceram-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for porcelain stoneware, ceramics and 2 cm patio slabs.
From: 89,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: abrasive cutting of e.g. natural stone, engineered stone, ceramics and concrete. With the standard guard wet or dry (without dust extraction); with the extraction hood dry only and in combination with a vacuum cleaner. Use diamond cutting discs only and always work with a guard.
Personal protective equipment must be worn during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended.
Noise emission: sound pressure level 87 dB(A), sound power level 100 dB(A) – hearing protection required. Vibration: 7 m/s².
In wet operation, operate only with a PRCD safety switch (DI version) or via an isolating transformer (CEE version), in accordance with the applicable accident prevention regulations in Germany.
Dust produced when working stone containing crystalline silica is hazardous to health. Material containing asbestos must not be processed.
Only use tools up to Ø 180 mm whose permissible speed is at least equal to the maximum speed of the machine.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions.
