Compact dry cutter with 1,750 W of power, variable speed control and a large cutting depth.
446,00 €
The BEAVER 180/2 is a compact dry cutter with a 1,750 W motor that can be used even where previously only significantly heavier machines were employed.
The “Multiple Choice” D-handle with 4 selectable handle positions adapts to individual working habits, while the ideally balanced design and the D-handles with soft-grip foam directly above the working axis allow relaxed working even under heavy use.
Powerful drive for demanding cutting work.
Variable from 2,000–7,000 rpm for every material.
For relaxed working even under heavy use.
Cutting depth up to 57 mm for compact, precise cuts.
Dry cutting of concrete and mineral building materials, e.g. for floor and edge cuts on construction sites and in interior fitting.
Power: 1,750 W
Voltage: 230 / 115 V
Speed: 2,000–7,000 rpm
Tool max.: 180 mm
Cutting depth max.: 57 mm
Weight: 3.7 kg
1 x silicone mains cable 4 m
1 x flange
1 x FIXTEC clamping nut
1 x guard
1 x Allen key
1 x vibration-damped “Multiple Choice” handle
In a box
GADIA Ultra-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for concrete and universal building materials with a balanced ratio of cut quality, speed and service life.
From: 37,00 €
GADIA-Cut Cutting Discs
(Varianten)
High-quality diamond cutting discs for precise and efficient cutting work in concrete, natural stone, tiles and other building materials.
From: 23,00 €
GADIA Sprint-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for fast cutting work in concrete and hard building materials with high cutting speed and good service life.
From: 61,00 €
GADIA Turbo-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for cutting work in hard material.
From: 81,00 €
GADIA Abrasiv-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for abrasive building materials such as asphalt and screed.
From: 62,00 €
GADIA Easy-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for precise cutting work in porcelain stoneware, ceramics and hard tiles.
From: 61,00 €
GADIA Ceram-Cut 180
(Varianten)
Diamond cutting disc Ø180 mm for porcelain stoneware, ceramics and 2 cm patio slabs.
From: 89,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: the angle grinder is intended for grinding and abrasive cutting of metal, stone and ceramic materials, as well as for sanding with sandpaper and working with wire brushes. The power tool is suitable for dry use only; it is not suitable for polishing.
Personal protective equipment must be worn during operation: depending on the application, full face protection, eye protection or safety goggles. Recommended where appropriate: dust mask, hearing protection, protective gloves or a special apron.
Noise emission: sound pressure level 88 dB(A), sound power level 101 dB(A) – hearing protection required. Vibration: 7 m/s².
For complete safety instructions, see the original operating instructions.
