Powerful one-handed dry angle grinder with high-quality gearbox for high power reserves in continuous use – tools up to Ø 150 mm, with constant speed (CON) or speed control in 7 settings A–G (VARIO).
From: 405,00 €
Belongs to: Genius Angle Grinders – Compare models
Cutting, grinding and polishingdry angle grinder for marble, granite, engineered stone, porcelain stoneware, ceramics, glass and sandstone – with tools up to Ø 150 mm.
Power reserves in continuous usethe 1,750 W motor is designed for demanding dry work on stone.
CON or VARIOCON at a constant 6,800 rpm, VARIO in 7 settings A–G from 1,700 to 6,800 rpm – the electronics hold the speed even under load.
High-quality gearboxthe gearbox is designed for robust use and transmits the motor power even under continuous load.
Soft start and overload protectionsoft start for a controlled start, temperature-dependent overload protection protects the motor from damage.
One-handed machine at 2.9 kgpowerful one-handed angle grinder – handy and powerful at the same time.
Fast tool changethe spindle lock holds the spindle – pads and discs are changed quickly.
Silicone mains cable in a signal colourwear- and break-resistant and clearly visible – available for 230 or 115 V.
The GENIUS MAXI is a powerful one-handed angle grinder for cutting, grinding and polishing mineral materials such as marble, granite, engineered stone, porcelain stoneware, ceramics, glass or sandstone – without water supply. The 1,750 W motor provides high power reserves in continuous use and takes tools up to Ø 150 mm. Soft start and electronics hold the speed even under load, and temperature-dependent overload protection protects the motor. At 2.9 kg the machine stays handy, and the spindle lock makes tool changes easy.
You choose the control: CON runs at a constant 6,800 rpm, VARIO can be set in 7 settings A–G from 1,700 to 6,800 rpm for every application. The robust dry angle grinder for stonemasons, sculptors, restorers, tilers and renovators.
Material
Work
Not suitable| Power | 1,750 W |
|---|---|
| Voltage | 230 / 115 V (depending on version) |
| Operating condition | Dry |
| Speed control | Variable (VARIO), 7 speed settings A–G |
| Speed | 1,700–6,800 rpm |
| Tool Ø max. | 150 mm |
| Spindle thread | M14 / Ø 22.2 mm |
| Weight | 2.9 kg |
| Protection | Soft start, temperature-dependent overload protection |
For professional use by trained specialist personnel only. Read and follow the enclosed original operating instructions carefully before first use. Intended use: cutting, grinding and polishing mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone or similar). This machine is suitable for dry use only. Personal protective equipment must be worn during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended. Noise emission: sound pressure level 89 dB(A), sound power level 102 dB(A) – hearing protection required. Vibration: 7 m/s². Dust produced when working stone (crystalline silica) is hazardous to health. Material containing asbestos must not be processed. Not suitable for use by children. For complete safety instructions, see the original operating instructions.
