Handy brushless stone cutter with open extraction hood and vacuum cleaner connection – for pulling cuts up to 20 mm deep.
465,00 €
The SMART CUTTER 125 ECO BL is the handy stone cutter for clean cuts in natural and engineered stone, porcelain stoneware and ceramics. Its brushless magnetic motor works without carbon brushes – no brush changes, up to 30 % higher efficiency, significantly more torque in the lower speed range and noticeably less heat, even under full load.
The open guard with extraction port offers an optimum view of the cut with convincing dust extraction; the swivel joint on the vacuum cleaner connector prevents twisted hoses. For square cuts, place the guide edge of the extraction port on the workpiece, plunge in and pull the cut cleanly through. When switched off, the magnetic motor brakes the disc quickly.
Slim, light and weighing only 2.8 kg – ideal for tilers, stonemasons and renovators who want to work precisely and with little dust.
No brush changes, up to 30 % higher efficiency and significantly less heat – even under full load.
Open guard with extraction port and rotating vacuum cleaner connector – clear view and clean air.
Place, plunge in squarely, pull along the guide edge – for exact cuts.
Only 2.8 kg – handy design for low-fatigue work.
Stone cutter for natural and engineered stone processing – for parting and cutting predominantly mineral materials such as marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass and sandstone. Particularly suitable for tilers, stonemasons, renovators, floor renovators, restorers and sculptors. Suitable for dry use only.
Power input: 1,400 W
Voltage: 230 V
Operating mode: Dry
Speed control: Variable, infinitely adjustable
Speed: 1,600–6,400 rpm
Tool Ø max.: 125 mm
Cutting depth max.: 20 mm
Spindle thread / bore: M14 / 22.2 mm
Weight: 2.8 kg
Soft start, restart cutout
1 x rubber mains cable 4 m
1 x guard with rotating vacuum cleaner connector Ø 36–46 mm
1 x clamping flange
1 x flange nut
1 x pin spanner
1 x ball handle
in a box
GADIA Ultra-Cut 125
(Varianten)
Diamond cutting disc Ø125 mm for concrete and universal building materials with a balanced ratio of cut quality, speed and service life.
From: 28,00 €
GADIA-Cut Cutting Discs
(Varianten)
High-quality diamond cutting discs for precise and efficient cutting work in concrete, natural stone, tiles and other building materials.
From: 23,00 €
GADIA Sprint-Cut 125
(Varianten)
Diamond cutting disc Ø125 mm for fast cutting work in concrete and hard building materials with high cutting speed and good service life.
From: 38,00 €
GADIA Turbo-Cut 125
(Varianten)
Diamond cutting disc Ø125 mm for cutting work in hard material.
From: 40,00 €
GADIA Abrasiv-Cut 125
(Varianten)
Diamond cutting disc Ø125 mm for abrasive building materials such as asphalt and screed.
From: 41,00 €
GADIA Easy-Cut 125
(Varianten)
Diamond cutting disc Ø125 mm for precise cutting work in porcelain stoneware, ceramics and hard tiles.
From: 29,00 €
GADIA Ceram-Cut 125
(Varianten)
Diamond cutting disc Ø125 mm for porcelain stoneware, ceramics and 2 cm patio slabs.
From: 60,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: parting or cutting predominantly mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for dry use only. Use diamond cutting discs only; always work with the guard fitted and a powerful dust extraction system connected.
Personal protective equipment is mandatory during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended.
Noise emission: sound pressure level 83.6 dB(A), sound power level 94.6 dB(A) – hearing protection required. Vibration: 9.5 m/s².
Dust produced when working stone containing crystalline silica is hazardous to health. Material containing asbestos must not be processed.
Sockets in outdoor areas must be fitted with residual current devices (RCD).
Only use accessory tools up to Ø 125 mm whose permissible speed is at least equal to the maximum speed of the machine.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions.
