Affordable professional entry-level wet polisher with a constant speed of 2,500 rpm – ball-bearing flush head and transparent splash guard.
From: 479,00 €
The POLIFOX 1400 CON is the affordable professional entry-level machine for wet polishing natural and engineered stone. The powerful one-handed polisher runs at a constant 2,500 rpm – a speed designed for stone polishing; soft start, electronics and overload protection ensure consistent results.
GALESKI quality in detail: the spindle is ball-bearing mounted in the flush head, with the water seals located below it. The proven, flexible and transparent splash guard keeps moisture and dirt away from the motor housing and significantly extends the service life; the aluminium end shield is water-cooled.
Ergonomic with rear handle and D-handle – for stonemasons, tilers and renovators who want to wet polish professionally.
Speed designed for stone polishing – the electronics maintain it even under load.
Less moisture and dirt in the motor housing – for a significantly longer service life.
GALESKI quality with water seals below and a water-cooled aluminium end shield.
Ergonomic design for low-fatigue work.
Wet polisher for natural and engineered stone processing. Particularly suitable for stonemasons, sculptors, restorers, tilers, renovators and floor renovators. For wet use only – operate only with an isolating transformer or a PRCD (portable residual current device).
Power input: 1,420 W
Voltage: 230 / 115 V (depending on variant)
Operating mode: Wet
Speed control: Constant
Speed: 2,500 rpm
Tool Ø max.: 100 mm
Spindle thread: M14
Weight: 2.9 kg
Soft start, overload protection
1 x silicone mains cable 4 m
1 x water hose 2.5 m with brass quick coupling
1 x D-handle
1 x PRCD or CEE plug (depending on variant)
1 x splash guard
in a box
GADIA Resin Premium 100
(Varianten)
Diamond grinding pad Ø100 mm for wet grinding on natural stone, granite and mineral materials.
20,00 €
GADIA Resin Premium Grinding and Polishing Pads
(Varianten)
Diamond grinding and polishing pads for wet grinding with high surface quality and long service life.
From: 18,00 €
Rubber Pad Flexible 100
Art.Nr.: 006.112
Velcro holder Ø100 mm for attaching diamond grinding pads with velcro system.
45,00 €
Aluminium Holder 100
Art.Nr.: 006.144
Velcro holder Ø100 mm for attaching diamond grinding pads with velcro system.
29,00 €
GADIA Splashguard
(Varianten)
GADIA Splashguard – protects motor and handle from splash water when wet cutting and grinding. In three sizes, fastened with a clamp or cable ties.
From: 19,00 €
For professional use by trained specialist personnel only.
Read and follow the enclosed original operating instructions carefully before first use.
Intended use: polishing and grinding mineral materials (e.g. marble, granite, engineered stone, fine porcelain stoneware, ceramics, glass, sandstone). Suitable for wet use only – always open the water supply first before switching on; never operate without water supply. Not suitable for cutting.
Personal protective equipment must be worn during operation: safety goggles and hearing protection. Protective gloves, sturdy non-slip footwear and an apron are recommended.
Noise emission: sound pressure level 87 dB(A), sound power level 100 dB(A) – hearing protection required. Vibration: 7 m/s².
As the machine is intended for wet use, it may only be operated in combination with an isolating transformer or a PRCD (portable residual current device) in accordance with the applicable accident prevention regulations in Germany.
Dust produced when working stone containing crystalline silica is hazardous to health. Material containing asbestos must not be processed.
Only use tools up to Ø 100 mm whose permissible speed is at least equal to the maximum speed of the machine.
Never allow children to use the machine.
For complete safety instructions, see the original operating instructions.
